Using the Still and Video Camera
Using the Still and Video Camera
1Press [Options] while monitoring a subject in the video camera mode, select Shooting Time and press O.
2Select a recording time from 5 Sec., 10 Sec., 20 Sec., 30 (50 or 60) Sec. or Maximum and press O.
Note: The available maximum recording time is displayed when Maximum is set. This time varies according to the video data quality. The higher the quality is, the shorter the recording time is.
Taking a photo with a frame (For still camera only)
You can add a frame to a photo before it is taken. Note that when a photo is taken with a frame, you cannot remove the frame afterwards. Image setting must be on QQVGA, or QVGA.
1Press [Options] while monitoring a subject, select Image Settings and press O, and then select Frame and press O.
2Select ON and press O. A frame appears.
3Press [Prev.] or [Next] to change the frame pattern and press O to select.
Changing the photo (video data) saving size
You can select photo (video data) size to store. The larger the size is, the better the data quality is.
1Press [Options] while monitoring a subject, select Image Settings (Video Settings) and press O, and then select Image Size and press O.
2Select a photo size (video data size) and press O.
Notes:
•You can also press w while the still camera or video camera is activated, and the data size will change as follows:
•In the still camera mode: QQVGA (120*160) → QVGA (240*320) → VGA
(640*480) → SXGA (1280*960, unavailable for the front camera lens) →
Back to QQVGA (120*160) again.
•In the video camera mode: SQCIF (128*96) → QCIF (176*144) → Back to
SQCIF (128*96) again.
Adding special effects to a photo/ video
You can make the subject look different by adding special and artistic effects.
1Press [Options] while monitoring a subject, select Image Settings (Video Settings) and press O, and then select Special Effects and press O.
2Select ON and press O. The screen turns to Sepia colour.
3Press [Prev.] or [Next] to change the special effects and press O to select.
4The available patterns are: Sepia, Black and White, Red, Green, Blue, Purple and Negative.
Inserting time and date (Date Stamp) (For still camera only)
This function enables you to add time and date to a QQVGA or QVGA sized still image.
1Press [Options] while monitoring a subject, select Image Settings and press O, and then select Date Stamp and press O.
48 | 49 |
