![](/images/new-backgrounds/1299503/29950375x1.webp)
Setting Up and Using OpenLCR
be able to respond automatically to OpenLCR’s call to notify your fax that it must receive new rate data. If this occurs, old, incorrect data will continue to be used.
♦Please note that the agreement you enter into by registering is between you and OpenLCR; it is not between you and any carriers. OpenLCR service is only available in the U.S.A.
Registering by fax
To register by fax, fill in the Fax Transmission Test and OpenLCR Line Activation Form, and then fax the form as follows:
1Place the form with the side you
wrote on face down, and push it gently into the document feeder of the fax machine.
The display will show:
READY TO SEND
2Press the OpenLCR key, the 5 key, and then the START/MEMORY key.
• Your fax automatically calls | OpenLCR | 5 |
|
| |||
| |||
OpenLCR and sends the form. After | START/MEMORY | ||
|
| ||
the form is sent, your fax will |
|
|
|
automatically receive the rate data. |
|
|
|
This lasts one or two minutes. When |
|
|
|
downloading is completed, the display |
|
|
|
will briefly show DOWNLOAD OK!! |
|
|
|
and then revert to the date and time. |
|
|
|
Your fax will print out the registration |
|
|
|
form to confirm that it was received. |
|
|
|
•OpenLCR will also program the date and time and your fax number in your fax machine.
36