![](/images/new-backgrounds/1299503/29950391x1.webp)
Setting Up and Using OpenLCR
Changing your user profile
To call OpenLCR to change your user profile, follow these steps:
1Pick up the handset on the fax machine.
2 Press the OpenLCR key and then the | 3 | |
3 key. | ||
OpenLCR | ||
|
3If the display shows the alternating messages at right, press the number keys to enter your fax/phone number, including the area code (the number must be 10 digits long). When finished, press the START/ MEMORY key.
(Note: If the message at right doesn’t appear, this step is not necessary.)
SET OWN NUMBER
10 DIGITS
3 | 1 | 2 | 4 | 4 | 2 | 4 | 4 | 1 | 1 |
START/MEMORY
(Example)
Important!
Be sure that you enter your correct area code and fax number. If not, your fax may not dial the correct number to connect to OpenLCR.
4Follow the instructions you hear.
♦Note: If you are on a pulse dial line, press the * key before pressing the number keys to respond.
(This makes your fax temporarily issue tone signals when you press the number keys.)
44