Messages and Signals
Messages and Signals
Display messages
Note: If you have turned on the Caller ID function, see Caller ID in Chapter 8 for display messages related to Caller ID.
CHECK PAPER SIZE | The paper size setting is incorrect. Change the paper |
| size setting as explained on page 23. |
|
|
COVER OPEN | The print compartment cover (under the operation |
| panel) is open. Open the operation panel (grasp the |
| top and pull toward you), and then press down firmly |
| on both sides of the print compartment cover to close |
| it. |
|
|
DOCUMENT JAMMED | The original document is jammed. See the following |
| section, Clearing Paper Jams. |
|
|
FAX RX IN MEMORY | A fax has been received in memory because the |
| imaging film needs replacement, you have run out of |
| printing paper, or the paper is jammed. The fax will |
| print out automatically when the problem is fixed. |
|
|
FILM END | The imaging film may need replacement. Check the |
| film and replace if necessary. |
|
|
FUNCTION MODE | The FUNCTION key has been pressed. |
|
|
HOLD | The HOLD/SEARCH key has been pressed to put the |
| other party on hold during a phone conversation. |
| Press the HOLD/SEARCH again to take the other |
| party off hold. |
|
|
LCR DOWNLOADING | The fax machine has called OpenLCR and is |
| receiving carrier rate data. This message only |
| appears if you have registered with OpenLCR. |
|
|
DOWNLOAD ERROR | The fax machine was unable to download rate data |
| from OpenLCR. Try downloading the data manually |
| as explained in Downloading (receiving) the rate data |
| manually on page 39. |
|
|
11. Trouble- shooting
