![](/images/new-backgrounds/1299503/29950383x1.webp)
Setting Up and Using OpenLCR
Fax transmission test
Even if you are not ready to register for OpenLCR service, we recommend that you test your fax setup by filling out Section A of the Fax Transmission Test and OpenLCR Line Activation Form and faxing it to OpenLCR as shown below. The test is free of charge and does not place you under any obligation to register with OpenLCR.
♦If the test sheet is successfully transmitted, it will be faxed back to you on the same connection. This lets you confirm that your setup is okay.
♦After receiving the test sheet, the current date and time will automatically be programmed in your fax machine. This saves you the trouble of setting the date and time in the fax yourself.
1 Place the form with Section A face down, and push it gently into the
document feeder of the fax machine.
The display will show:
READY TO SEND
2Press the OpenLCR key, the 5 key, and then the START/MEMORY key.
• Your fax machine will automatically | 5 |
|
| ||
| ||
call OpenLCR and send the form. The OpenLCR | START/MEMORY | |
form will then be faxed back to you, |
|
|
and the current date and time |
|
|
programmed in your fax machine. |
|
|
40