Sending a Fax by Automatic Dialing

Direct Keypad Dialing

You can also enter a full number with the number keys and then press the START/MEMORY key to begin dialing. You can use this method to dial a full number when you don’t need to speak to the other party before faxing.

1 Load the document(s).

The display will show:

READY TO SEND

Set the resolution and/or contrast if

RESOLUTION

desired.

3. Sending Documents

2Enter the number of the receiving

machine by pressing the numeric

keys.2 3 2 4 5 6 7

• If a pause is required between any

(Example)

of the digits to access a special service or an outside line, press the REDIAL key (two seconds per pause). The pause will appear as a hyphen. Several pauses can be entered in a row.

3Check the display. If the number of the receiving machine shown is correct, press the START/

MEMORY key.

START/MEMORY

If it is not correct, press the STOP key to backspace and clear one digit at a time, and then re-enter the correct digit(s).

67

Page 69
Image 69
Sharp FO-775L manual Direct Keypad Dialing, Memory key