Power FAILURE/DEW/USED Time menu appears | Sharp SRT-8960, SRT-8168

RF4QR/NA (SRT-8960 GB) Wed. May, 08/2002

CHECKING POWER FAILURE, FAILURE DUE TO CONDENSATION AND USAGE DURATION

1Press the MENU button to display the MAIN MENU.

2Turn the JOG dial to select the “9.OTHERS” line, then turn the SHUTTLE ring clockwise.

øThe (OTHERS) menu appears.

<OTHERS>

*ALARM@LOG

*POWER@FAILURE/DEW

*TERMINAL@SET@@@@SET1

3Turn the JOG dial to select the “POWER FAILURE/DEW” line, then turn the SHUTTLE ring clockwise.

øThe (POWER FAILURE/DEW/USED TIME) menu appears.

Example

<POWER@FAILURE> 001@FAILURE@@12-25@07:15

@@@@RECOVERY@12-25@07:30

<DEW> 001@FAILURE@@12-25@11:00

@@@@RECOVERY@12-25@12:00

<USED@TIME>

@@VIDEO@@@@@@@@@00003H

@@POWER@@@@@@@@@00007H

POWER FAILURE . . . . The number of power failures, and the date and time of the most recent power failure and recovery are displayed.

DEW. . . . . . . . . . . . . . . The number of failures due to condensation, and the date and time of the most recent failure and recovery are displayed.

USED TIME . . . . . . . . . The video heads usage duration and the power on duration are displayed.

4Press the MENU EXIT button.

NOTE:

œIf the MENU RESET button is pressed while the “POWER FAILURE” and “DEW” data is displayed, the data is erased. The “USED TIME” data cannot be reset. “P” will be erased from the digital display.

44

English

Image 45

Sharp SRT-8960, SRT-8168, SRT-8040 instruction manual Power FAILURE/DEW/USED Time menu appears

Contents

SRT-8960 SRT-8168 SRT-8040 For customers in Canada Precautions Moisture Condensation Problems PrecautionsLocation Avoiding Electrical Shock and Fire Contents FeaturesAccessory Front Panel Locations of Controls and Indicators Operation Indicators Locations of Controls and IndicatorsOperation Mode Indicator Digital Display With the RS-485/232C interface board B C D Back Panel With the RS-485/232C interface board Connections Power Cord Installation ON-SCREEN Menu Using the JOG dial and Shuttle ring for settingsMain Menu Sub-menus ON-SCREEN Menu Setting the Language and Clock Language SettingClock setting Setting the Language and Clock Automatic Daylight Saving Time AdjustmentFactory setting Superimpose Display Selecting the Superimpose DisplayChanging the Superimpose Display Position Video Cassette Tapes Setting the Type of Tape Used Setting the Action to Take When a Cassette is LoadedVideo Cassette Tapes Correct tape thread check function Operation Tape ManagementIf no tape management data is present on the tape If tape management data is present on the tape Setting the Tape Management Function Tape ManagementTape Management menu appears Conflict display sample Tape Management Conflict Display Normal Recording Recording Speed ModeNormal Recording Before starting Normal Recording Pause/still indicator N flashesRecord Pause Recording Check Setting the clog detection Action to Take when the Video Signal DeterioratesClog Detection Setting the video input signal Setting the Mode at the End of the TapeSetting when not using Autorepeat recording Setting when using Autorepeat recording Repeat indicator lights Autorepeat RecordingAutorepeat Recording Alarm Recording Alarm Recording SettingALARM/SERIES REC SET menu appears Alarm Recording Reset Function Alarm RecordingAlarm Recording Counter Display Connections to the Alarm in Terminal Alarm Scan Alarm Search Program Timer Recording Timer SET menu appears Program Timer Recording Changing a Program Timer Recording Setting the HolidaysTo Cancel a Program Timer Recording To cancel all program timer recordings These portions will not be recorded Recording Using AN External Timer Input Series Recording Series Recording SetupOperation Loop recording Single Image Recording Single Image Recording Setup Normal Playback Special Playback Shuttle Ring Operation Special Playback DAY/TIME Search Tape CounterDay/Time Search Cancel the 4 digit security lock Setting the 4 digit security lockSecurity Lock Quick Method Security Lock Clock Adjustment Selecting Input and Output TerminalsConnection Cassette Eject Setup Setting the Cassette Eject ModeEject output Timer OUT terminal Eject input Series in terminal Synchronization Control Operator Mode Administrator/Installer Mode Setting the Cassette Eject ModeSynchronization Control SC will flash on the digital display Setting for RS-485 or RS-232C USE Setting the Address and Data Transfer SpeedSettings when using RS-485 Power FAILURE/DEW/USED Time menu appears Tape END OUT Terminal Output Setting Timer OUT terminalOutput Terminals Tape END OUT Terminal SW OUT Terminal Output Setting Output TerminalsSW OUT Terminal ALARM@@@@@@@@@@@@Y NON@REC@@@@@@@@@@N Remote Jack Remote control setting Maintenance Maintenance Maintenance TableMaintaining and Checking The Mechanism Troubleshooting Guide After a Power FailureSystem Down General Specifications SpecificationsConnectors Video Specifications Other SpecificationsConnectors When the Terminal SET is set to SET2 Weekdays 830 AM 500 PM Pacific Time Sanyo Industrial VCR Warranty