ALARM RECORDING

Alarm Search

To go to the beginning of a desired alarm recording.
1Press the SEARCH button during stop mode.
ø“AL SEARCH 01” appears on screen.
2Press the REC/PLAY SPEED l (or j) button to set
the desired alarm number (01 to 99), then turn the
SHUTTLE ring clockwise (or counterclockwise).
øThe desired alarm is searched for and a still
image of the beginning of the alarm recording
appears on-screen.
NOTE:
œThe alarm number is relative to the actual tape
position. (Please refer to the illustration below.)
3Press the PLAY button.
øPlayback starts.
NOTES:
œIf the end of the tape is reached during a search, the
tape will rewind and stop. If the beginning of the tape
is reached, it will stop.
œThis function does not operate when a warning
display appears on the digital display.

Alarm Scan

To look for an alarm recording by viewing the first 5
seconds of each alarm recording.
1Press the SEARCH button twice during stop mode.
ø“AL SCAN” will be displayed on screen.
2Turn the SHUTTLE ring clockwise (or
counterclockwise).
øThe unit will advance (or rewind) the tape at
high speed and playback the first 5 seconds of
every alarm recording.
øTo cancel the alarm scan mode, press the
STOP button.
3While the desired recording is being played back,
press the PLAY button.
øPlayback starts and alarm scan mode is
canceled.
NOTES:
œIf the end of the tape is reached during a scan, the
tape will rewind and stop. If the beginning of the tape
is reached, it will stop.
œThis function does not operate when a warning
display appears on the digital display.
Playback
112
Rewind direction
Fast-forward direction
Actual position
Alarm number 2
Alarm trigger input point
RF4QR/NA (SRT-8960 GB) Wed. May, 08/2002
26 English