NORMAL RECORDING

Setting the Mode at the End of the Tape

You can select the mode on the VCR when the tape
reaches the end during recording.
1Press the MENU button to display the MAIN MENU.
2Turn the JOG dial to select the “3.GENERAL SET”
line, then turn the SHUTTLE ring clockwise.
øThe (GENERAL SET) menu appears.
<GENERAL@SET>
TAPE@IN@MODE@@@@@STOP
TAPE@END@MODE@@@@REW
CLOCK@ADJUST@@@@@01:00
THREAD@CHECK@@@@@N
VIDEO@LOSS@@@@@@@N
CLOG@DETECT.@@@@@N
REMOTE@@@@@@@@@@@MENU
VIDEO@@@@@@@@@@@@COLOR
VERTICAL@SYNC@@@@Y
TAPE@@@@@@@@@@@@@T-160
3Turn the JOG dial until the “TAPE END MODE”
setting is highlighted, then turn the SHUTTLE ring
clockwise.
4Turn the JOG dial to select the desired mode, then
turn the SHUTTLE ring clockwise.
œSetting when not using Autorepeat recording
REW. . . . . . . Rewinds the tape to the
beginning, then goes to stop mode
STOP. . . . . . Goes to stop mode
EJECT . . . . . The cassette is ejected
œSetting when using Autorepeat recording
REPEAT1. . . Autorepeat recording mode is
automatically canceled if there
was an alarm trigger
REPEAT2. . . Autorepeat recording mode is
active even if there was an alarm
trigger
5Press the MENU EXIT button.

Setting the video input signal

The video input signal during recording can be set to
either color or black & white.
1Press the MENU button to display the MAIN MENU.
2Turn the JOG dial to select the “3.GENERAL SET”
line, then turn the SHUTTLE ring clockwise.
3Turn the JOG dial until the “VIDEO” setting is
highlighted, then turn the SHUTTLE ring clockwise.
4Turn the JOG dial to select the desired mode, then
turn the SHUTTLE ring clockwise.
COLOR . . . . For recording in color
B/W . . . . . . . For recording in black & white
5Press the MENU EXIT button.
NOTES:
œSet to “COLOR” for systems which include color
signals (including cases where black & white signals
are mixed in), and set to “B/W” for systems which only
use black & white signals.
œUse the same setting for recording and playback.
œIf tapes that have been recorded in black & white are
played back when the setting is at “COLOR”, the
recordings will not be played back in color.
œIf using a black & white camera, set to “B/W”.
Recordings will not be made in color even if “COLOR”
is set.
RF4QR/NA (SRT-8960 GB) Wed. May, 08/2002
22 English