Sharp SRT-8040, SRT-8960, SRT-8168 General Specifications, Video, Audio, Connectors

RF4QR/NA (SRT-8960 GB) Wed. May, 08/2002

SPECIFICATIONS

General Specifications

Video head system	Dual-azimuth 4-head rotating helical scanning system:
	Dual azimuth 2-head for record and standard playback
	Dual azimuth 4-head for forward picture search, reverse picture search
	and still mode
Audio recording	In 8-, 24- and 40-hour modes (when using T-160 tape)
	In 6-, 18- and 30-hour modes (when using T-120 tape)
Tape speed	11.12 mm /sec (8-hour mode)
Specified video cassette tape	VHS 1/2 inch video cassette tape
Recording/playback time (SRT-8960 only)	8, 24, 40, 64, 96, 128, 160, 224, 320, 480, 640, 960 and 1280 hours (when
	using T-160 tape)
	6, 18, 30, 48, 72, 96, 120, 168, 240, 360, 480, 720 and 960 hours (when
	using T-120 tape)
Recording/playback time (SRT-8168 only)	8, 24, 40, 64, 96, 128, 160 and 224 hours (when using T-160 tape)
	6, 18, 30, 48, 72, 96, 120 and 168 hours (when using T-120 tape)
Recording/playback time (SRT-8040 only)	8, 24 and 40 hours (when using T-160 tape)
	6, 18 and 30 hours (when using T-120 tape)
Fast forward/rewind time	approximately 2 minutes 35 seconds (when using T-160 tape)
	approximately 2 minutes (when using T-120 tape)
Television system	NTSC color TV system

Video

Recording method	Luminance signal: FM recording
	Chrominance signal: Down-converted direct recording
Video input	1 V(p-p), BNC, 75 Ω, unbalanced
Video output	1 V(p-p), BNC, 75 Ω, unbalanced
Horizontal resolution	Black & white mode	350 line or more
	Color mode	300 line or more

Audio

Input	–8 dBs, RCA pin jack, 27 kΩ, unbalanced
Output	–8 dBs, RCA pin jack, 600 Ω, unbalanced

Connectors

Alarm (1 shot) input	No voltage, make-contact switch input (Low input 100ms or more,
	Normally 5 V)
Control input	Key code (pulse signal) (Normally 5 V)
Series input	No voltage, make-contact switch input (Low input 1s or more, Normally 5 V)
Ext timer (alarm reset) input	No voltage, make-contact switch input (Low input 100ms or more,
	Normally 5 V)
Common	0 V (GND)
Warning output	Open collector Max. 500 mA (Active Low 0 V, Normally open)
Control output	Key code (pulse signal) (Normally 5 V)
Tape end output	Open collector Max. 50 mA (Active Low 0 V, Normally open)
Timer output	DC 5 V, 5.7kΩ, (Low output)
Switch output	Pulse signal (Normally 5 V)
Remote control input	3.5 mm mini jack

52 English