CONNECTIONS
Connect the video camera and TV monitor as shown in the figure below.
NOTE: Before making the connections, make sure the devices are disconnected from the power outlet.
RS232C
TERMINATE
Do not connect to phone line.
OFF ON
RS485BA
AC IN
AUDIO VIDEO
ININ OUTOUT
REMOTEMIC IN
SW OUT
WARNING OUT
1
EXT TIMER IN
SERIES IN
CONTROL IN
ALARM(1 SHOT) IN
(ALARM RESET)
CONTROL OUT
TAPE END OUT
TIMER OUT
COM
2
OPEN COLLECTOR(Max. 1=500mA, 2=50mA)
To remote control
(sold separately)
Video camera
(sold separately)
TV Monitor (sold separately)
Coaxial
cable
(sold
separately)
To
VIDEO
IN
jack
To
VIDEO
OUT
jack
From an external
audio source
Power cord
To outlet
SEE MANUAL

Power Cord Installation

1Plug the supplied power cord firmly into the AC
power input AC IN ~ socket.
2Insert the plug of this power cord into a outlet.
NOTES:
œFor more details, please refer to the manuals
accompanying all other devices. If the connections
are not made properly, it may cause a fire or damage
the equipment.
œYou can use a VA-RMN01 Remote Control Unit (sold
separately) to control the VCR remotely.
œThe grounded power cord (3-pin plug) must be
connected to a grounded power outlet.
œIf there is no video signal when the power is turned
on, “NO VIDEO” will be displayed on-screen.
RF4QR/NA (SRT-8960 GB) Wed. May, 08/2002
8English