Sharp SRT-8040, SRT-8960, SRT-8168 instruction manual Recording Using AN External Timer Input

RF4QR/NA (SRT-8960 GB) Wed. May, 08/2002

RECORDING USING AN EXTERNAL TIMER INPUT

Recording can be controlled by an external start/stop signal input at the EXT TIMER IN terminal.

While there is input at the EXT TIMER IN terminal, the external input indicator “E” will light on the digital display and the input will be recorded. Recording will stop when there are no more input signals.

Example 3: To record using the signal input at the EXT TIMER IN terminal, in 24-hour mode.

œFollow the Before starting steps, under “NORMAL RECORDING”.

NOTE:

œExternal timer input recording can only be set on the “EXT” line of the (TIMER SET) menu.

1Follow steps 1 and 2 under “PROGRAM TIMER RECORDING” on page 27.

2Turn the JOG dial until the “EXT” line is highlighted, then turn the SHUTTLE ring clockwise.

3Turn the JOG dial to select the recording speed mode (ex: 24), then turn the SHUTTLE ring clockwise.

4Turn the JOG dial to select “Y”.

<TIMER@SET>

WEEK@@START@@STOP@@SPD

SUN@@@--:--@--:--@@---	@N
MON@@@--:--@--:--@@---	@N
TUE@@@--:--@--:--@@---	@N
WED@@@--:--@--:--@@---	@N
THU@@@--:--@--:--@@---	@N
FRI@@@--:--@--:--@@---	@N
SAT@@@--:--@--:--@@---	@N
DAILY@--:--@--:--@@---	@N

EXT@@@*****@*****@@@24@Y

5Press the MENU EXIT button.

6Press the TIMER button.

NOTES:

œAlarm recording is not possible using this function.

œAlarm recording reset function is not possible using this function.

œOther timer recordings using the standard procedure can also be programmed.

English 31