Daktronics All Sport 5000 manual Accessing Segment Timer, Baseball Operations

3.2 Accessing Segment Timer

Turn on the console. Enter the multi-purpose sport code used for the scoreboard in use and press <ENTER>. A list of sport codes can be found in Appendix B.

The segment timer program is accessed through the main menu of each individual sport. The DISPLAY MENU allows the user to start the segment timer. Press the <MENU> key and press the down or up arrows until the following message is displayed:

Note: The segment timer function is disabled while the clock is running.

LCD Display	Action
MENU-MAIN enter	Press <YES> to enter the display menu.
display menu?	Press <YES> to exit the sport code and run the
	segment timer program.
MENU- Display run	The console will prompt the user to press <YES> a
seg timer y/n
	second time to enter the segment timer to avoid
	accidental exit from the sport program.
Exit game	Refer to Section 3.1 for general segment timer
Are you sure y/n	operation instructions.

3.3Accessing 2-Digit or 6-Digit Display Segment Timer

This code is only used for the two-digit or six-digit displays designed exclusively for segment timing. Enter code 100 after turning on the All Sport console to access the exclusive segment timer program. For all other scoreboards, enter the correct scoreboard code and use <MENU> to access the segment timer. Refer to Section 3.2.

40 Baseball Operations