Daktronics All Sport 5000 manual Break, Period, Overtime mmss

Main Clock

Note 1: The settings entered for Main Clock are used with the <SET MAIN CLOCK> key.

Note 2: The period, break and overtime lengths are used differently depending on the direction of the main clock. For count down, the main clock is set to the selected length, decrements towards zero, and stops at zero. For count up, the main clock is set to zero, increments towards the selected length, and stops when the selected length is reached.

LCD Display		Action
MAIN CLOCK-MODE		When the main clock is set to count down and tenths
TENTH SECOND? n		of a second is selected, the main clock displays in
		tenths of a second remaining when the time is below
n = current setting
		one minute.
		Press <YES> to set the main clock to display tenths
		of a second.
		Press <NO> to display whole seconds.
MAIN CLOCK-TIME		Enter the correct amount of time per period in
PERIOD	mm:ss	minutes and seconds on the number pad and press
		<ENTER>.
mm:ss = current setting
		For example, 20:00 per half or 8:00 per quarter
		Note: Pressing <ENTER> to select the period time
		as the main clock setting will increment the current
		period number if the clock value was previously zero.
MAIN CLOCK-TIME		Set the amount of time between periods.
BREAK	mm:ss	Enter the correct amount of time for break length in
mm:ss = current setting
		minutes and seconds on the number pad and press
		<ENTER>. For example, 1:00
MAIN CLOCK-TIME		Set the amount of time for the overtime periods.
OVERTIME mm:ss		Enter the correct amount of time for overtime periods
mm:ss = current setting
		in minutes and seconds on the number pad and
		press <ENTER>.
		For example, 5:00

Basketball Operations 97