Daktronics All Sport 5000 manual Switch Output, Water Polo Operations

Switch Output

The All Sport 5000 series console has a switch that can be used to drive a number of different devices. The switch can be configured to operate under different settings. The default setting is 1-CLOCK= 0.

To display the switch setting that you want to select:

Press the number (0,1,2,3) key as a shortcut or use the left and right arrow keys to scroll to the desired setting.

Press <YES> to select the new setting.

Press <NO> or the down arrow key to leave the switch setting and display the next prompt.

The possible settings for the switch output are as follows:

Setting		Result
0-DISABLED		The switch remains open at all times and any
	SWITCH OUTPUT=n
		external devices are disabled.
	0-DISABLED?
n = current setting
1-CLOCK = 0		In count down mode, the switch closes when the
	SWITCH OUTPUT=n
		main clock reaches zero and remains closed until a
	1-CLOCK =0?
		nonzero value is entered.
n = current setting
		In count up mode, the switch closes when the main
		clock reaches the proper period, break, or overtime
		length and opens when any other value is entered.
2-CLOCK STOP		The switch closes when the main clock is stopped
	SWITCH OUTPUT=n
		and opens when the main clock is running. External
	2-CLOCK STOP?
		devices are disabled when the main clock is running.
n = current setting
3-MAIN HORN		The switch closes when the main horn sounds. This
	SWITCH OUTPUT=n
		could be when the auto horn is enabled and the
	3-MAIN HORN?
		main clock reaches zero or when <HORN> is
n = current setting		pressed.

310 Water Polo Operations