Daktronics All Sport 5000 manual Settings, Karate Operations 245

16.4 Settings

The following settings can be edited by the user when EDIT SETTINGS has been selected from the Main Menu.

Main Clock

LCD Display		Action
	MAIN CLOCK-TIME	Enter the correct amount of time per period in minutes
	PERIOD mm:ss	and seconds on the number pad and press <ENTER>.
mm:ss = current setting		For example, 5:00.
		Note: Pressing <ENTER> to select the period time as the
		main clock setting will increment the current period
		number if the clock value was previously zero.

Switch Output

The All Sport 5000 series console has a relay that can be used to drive a number of different devices. The relay can be configured to operate under different settings. The default setting is 1-CLOCK= 0.

To display the relay settings that you want to select:

Press the number (0,1,2,3) key as a shortcut or use the left and right arrow keys to scroll to the desired setting.

Press <YES> to select the new setting.

Press <NO> or the down arrow key to leave the relay setting and display the next prompt.

The possible settings for relay output are as follows:

	Setting			Result
	0-DISABLED			The relay remains open at all times and any external devices
		SWITCH OUTPUT=n		are disabled.
		0-DISABLED?
	N = current setting
	1-CLOCK = 0			In count down mode, the relay closes when the main clock
		SWITCH OUTPUT=n		reaches zero and remains closed until a nonzero value is
		1-CLOCK =0?		entered.
	N = current setting			In count up mode, the relay closes when the main clock
				reaches the proper period, break, or overtime length and
				opens when any other value is entered.
Karate Operations			245