Daktronics All Sport 5000 manual To display the switch setting that you want to select

Switch Output

The All Sport 5000 series console has a switch that can be used to drive a number of different devices. The switch can be configured to operate under different settings. The default setting is 1-CLOCK= 0.

To display the switch setting that you want to select:

Press the number (0,1,2,3) key as a shortcut or use the left and right arrow keys to scroll to the desired setting.

Press <YES> to select the new setting.

Press <NO> or the down arrow key to leave the switch setting and display the next prompt (please refer to the table on the following page).

The possible settings for the switch output are as follows:

Setting		Result
0-DISABLED		The switch remains open at all times and any external
	SWITCH OUTPUT=n	devices are disabled.
	0-DISABLED?
n = current setting
1-CLOCK = 0		In count down mode, the switch closes when the main
	SWITCH OUTPUT=n	clock reaches zero and remains closed until a
	1-CLOCK =0?	nonzero value is entered.
n = current setting		In count up mode, the switch closes when the main
		clock reaches the proper period, break, or overtime
		length and opens when any other value is entered.
2-CLOCK STOP		The switch closes when the main clock is stopped
	SWITCH OUTPUT=n	and opens when the main clock is running. External
	2-CLOCK STOP?	devices are disabled when the main clock is running.
n = current setting
3-MAIN HORN		The switch closes when the main horn sounds. This
	SWITCH OUTPUT=n	could be when Auto Horn is enabled and the main
	3-MAIN HORN?	clock reaches zero or when <HORN> is pressed.
n = current setting

Wrestling Operations 231