Daktronics All Sport 5000 manual General Multi-Purpose Timer Information, Menu-Main, Select TOD?

Shot Clock Control

The remote shot clock control box plugs into J7 on the back of the All Sport 5000 console. This unit has a rocker switch for Start/Stop and a momentary button for reset. When the reset button is pressed, the shot clock timer is changed to the reset value and stops the timer from decrementing. The shot clock timer restarts when the reset button is released. In independent mode, the Start/Stop switch starts and stops the shot clock timer when pushed, but does not stop when the main clock is stopped. When in synchronized mode, the shot clock timer will stop and start with the main clock switches only if it is running in the beginning.

2.8General Multi-Purpose Timer Information

There is no insert for the Multi-Purpose Timer codes. Code 99 is used to operate the multi- purpose timer.

Note: The Multi-Purpose Timer is a general timer used for 2, 4 and 6 digit time displays. The timer will count up or down through hours, minutes, and seconds. The information will shift on the 2 and 4 digit displays to show the most significant time values as the time changes.

The Multi-Purpose Timer code is also used as a Time-of-Day code by accessing the Time of Day Menu through the Menu Key. The segment Timer may also be accessed through the Menu Key.

Standard Keys

The keys that are used by the multi-purpose timer are <START>, <STOP>, <SET MAIN CLOCK>, <COUNT UP/DOWN>, <AUTO HORN>, <MANUAL HORN> and <MENU>. The key functions are explained in more detail in Section 2.6.

Accessing the Multi-Purpose Timer

Turn on the console, enter multi-purpose timer code and press <ENTER>.

Press the <MENU> key and press the down or up arrows until the following message is displayed:

LCD Display	Action
MENU-MAIN	Press <YES> to enter the Time of Day Menu.
SELECT TOD?

Basic Operations 37