Section 12: Track Operations
Sport Insert: LL-2439
The Sport Insert drawing is located at the end of this section. The Team Name insert and Block Diagram drawings are located in Appendix A. The Quick Reference is located in Appendix D.
Reference Drawings: |
|
Block Diagrams, A/S5000/3000, Outdoor Sports | Drawing |
Insert, Track | Drawing |
Insert, Team Name | Drawing |
Refer to the information in Section 2 to start up the console and use the sport insert. Read Section 2 carefully to fully understand the following operation instructions.
If an insert is lost or damaged, a copy of the insert drawing located at the end of this section can be used until a replacement can be ordered.
Use the labels provided in Appendix B to attach the correct code number label to the sport insert in the appropriate location. Write the code number in the space provided below.
Write the correct code number here.
Notes: The
External Timer Codes 8602 - 8604
•External timers must have specific Baud rates entered into the Venus® 7000 computer when using RTD information. The different rates are noted with each external timer.
•Code 8602 is for interfacing with the PowerTime timer.
•The Scoreboard type setting in the PowerTime under initialization/scoreboard/type must be set to
•Code 8603 is for interfacing with the OmniSport® 1000 or OmniSport 6000.
•The “Current Loop Scoreboard Setting” under Setup / Comm. Ports on the OmniSport 6000 must be set to
•Code 8604 is for interfacing with Hawkeye or Finish Lynx timers.
The Baud rate for the Hawkeye and Finish Lynx timers must be set to 9600 Baud.
Track Operations | 177 |
