Daktronics All Sport 5000 manual Baseball Operations, Baseball Keys, Key disabled, Inning +1

Section 4: Baseball Operations

Sport Insert: LL-2438

The Sport Insert drawing is located at the end of this section. The Team Name insert and Block Diagram drawings are located in Appendix A. The Quick Reference is located in Appendix D.

Reference Drawings:
Insert, Baseball	Drawing A-125061
Insert, Team Name	Drawing A-125290
Block Diagrams, A/S5000/3000, Outdoor Sports	Drawing A-124690

Refer to the information in Section 2 to start up the console and how to use the sport insert. Read Section 2 carefully to fully understand the following operation instructions.

If an insert is lost or damaged, a copy of the insert drawings are located at the end of this Appendix B, which can be used until a replacement can be ordered.

Use the labels provided in Appendix B to attach the correct code number label to the sport insert in the appropriate location. Write the code number in the space provided below.

Write the correct code number here.

If you do not know the code number to enter for your scoreboard, refer to Appendix B in this manual. If you do not know the model number of your scoreboard, refer to the Installation and Maintenance manual provided with the scoreboard.

4.1Baseball Keys

Inning +1

Note: If game stats are being received from DSTI the keys on the console will be disabled. The LCD will display the messages shown below when these keys are pressed.

LCD Display	Action
STATS RECEIVED	The key disabled message will display for one second
Key disabled	and then the <EXIT STATS> message will display and
	wait for a <YES> or <NO> key. If the <YES> key is
	pressed the stats data will be saved in the console and
EXIT STATS MODE
	the console will <EXIT STATS> mode until another
Y/N?	stats packet is received. This will allow the operator to
	enter player stats from the console if the DSTI feed is
	lost.

Baseball Operations 47