Daktronics All Sport 5000 manual Hockey Operations, Shots on Goal Console Operation, Hockey Keys

Section 9: Hockey Operations

Sport Insert: LL-2436

The Sport Insert drawing is located at the end of this section. The Team Name insert and Block Diagram drawings are located in Appendix A. The Quick Reference is located in Appendix D.

Reference Drawings:
Insert, Hockey	Drawing A-124218
Block Diagrams, A/S5000/3000 Hockey	Drawing A-124689
Insert, Team Name	Drawing A-125290

Refer to the information in Section 2 to start up the console and use the sport insert. Read Section 2 carefully to fully understand the following operation instructions.

If an insert is lost or damaged, a copy of the insert drawing located at the end of this section can be used until a replacement can be ordered.

Use the labels provided in Appendix B to attach the correct code number label to the sport insert in the appropriate location. Write the code number in the space provided below.

Write the correct code number here.

If you do not know the code number to enter for your scoreboard, refer to Appendix B in this manual. If you do not know the model number of your scoreboard, refer to the Installation and Maintenance manual provided with the scoreboard.

9.1Shots on Goal Console Operation

Enter code 4000 to use the All Sport 5000 console as a shots-on-goal console. All keys other than Home and Guest Shots on Goal +1 Goal -1will be disabled.

9.2Hockey Keys

Time Out On/Off

<TIME OUT ON/OFF> stops and starts the time out clock. The length of both the full and partial time outs can also be changed when the time out clock is stopped.

Note 1: Only the time outs configured in the EDIT SETTINGS function are displayed on the LCD and available for selection (please refer to the table on the following page).

Note 2: The up and down arrow keys can also be used to select the full and partial time outs.

Hockey Options 131