Daktronics All Sport 5000 manual Settings, Water Polo Operations

22.4 Settings

The user can edit the following settings when EDIT SETTINGS has been selected from the Main Menu.

Main Clock

Note 1: The settings entered for Main Clock are used with the <SET MAIN CLOCK> key.

Note 2: The period, break, and overtime lengths are used differently depending on the direction of the main clock. For count down, the main clock is set to the selected length, decrements towards zero, and stops at zero. For count up, the main clock is set to zero, increments towards the selected length, and stops when the selected length is reached.

LCD Display	Action
MAIN CLOCK-MODE	When the main clock is set to count down and tenths
TENTH SECOND? n	of a second is selected, the main clock displays in
	tenths of a second remaining when the time is below
n = current setting
	one minute.
	Press <YES> to set the main clock to display tenths of
	a second.
	Press <NO> to display whole seconds.
MAIN CLOCK-TIME	Enter the correct amount of time per period in minutes
PERIOD mm:ss	and seconds on the number pad and press
	<ENTER>.
mm:ss = current setting
	For example, 20:00 per period.
	Note: Pressing <ENTER> to select the period time as
	the main clock setting will increment the current period
	number if the clock value was previously zero.
	(Continued on next page)

306 Water Polo Operations