Electrical equipment contains hazardous Voltages and high
speed moving parts.
Can cause death, serious personal injury, or equipment
damage.
Always de-energize and ground the equipment before maintenance.
Maintenance should be performed only by qualified personnel.
48$/,),('3(56211(/
For the purposes of this manual, a qualified person is one who is familiar with
the installation, construction, or operation of the equipment and the hazards
involved. In addition, that person has the following qualifications:
(a) is trained and authorized to de-energize, clear, ground, and tag
circuits and equipment in accordance with established safety practices .
(b) is trained in the proper care and use of protective equipment such as
rubber gloves, hard hat, safety glasses, or face shields, flash clothi ng,
etc., in accordance with established safety procedures.
(c) is trained in rendering first aid.
The use of unauthorized parts in the repair of the equipment or tampering by
unqualified personnel will result in dangerous conditions which will cause
severe personal injury or equipment damage. Follow all safety instructions
contained herein.
,03257$17
The information contained herein is general in nature and not intended for
specific application purposes. It does not relieve the user of responsibility to
use sound practices in application, installation, operation, and maintenanc e of
the equipment purchased. Siemens reserves the right to make changes at any
time without notice or obligations. Should a conflict arise between the general
information contained in this publication and the contents of drawings or
supplementary material, or both, the latter shall take precedence.
6800$5<
These instructions do not purport to cover all details or variations in equipment, nor to provide for every possible
contingency to be met in connection with installation, operation, or maint enanc e. Should further information be desired
or should particular problems arise which are not covered sufficiently for the purchaser’s purposes, the matter should
be referred to the local sales office.
The contents of the instruction manual shall not become part of or modi f y any prior or existing agreement, commitment
or relationship. The sales contract contains the entire obligation of Siem ens Energy & Automation, Inc. The warranty
contained in the contract between parties is the sole warranty of Siemens Energy & Autom ation, Inc. Any statements
contained herein do not create new warranties or modify the existing warranty.