Integrator Screens
Integrator screens allow you to display numeric outputs with greater
resolution than other displays. They can display up to 4 output values on
the MGT at one time, with up to 11 digits of resolution. By default, the MGT
includes the ENERGY display and the outputs of Integrator modules #1
through #4.
To set up an integrator display screen:
1. Enter the handle of an Integrator’s Result output register (or other
numeric register if desired), then press ENTER. If you want to keep the
register that is currently in use, press the button labeled KEEP PREVIOUS.
2. Repeat step 1 for the remaining 3 registers whose Results you want to
display. If you want to keep the register that is currently in use, press
the button labeled KEEP PREVIOUS.
When you view your Integrator display screen, the labels of the selected
registers are displayed; if no labels have been defined, the default register
names appear. To the right of each label, the value of the register is
displayed.
238)
Any numeric register can be
displayed on an Integrator
screen.