Siemens Energy & Automation, contact Customer Service at 800-427-2256
and request the parameter handles for the 9700 Power Meter.
Standard Character Screens
Standard character screens are used for displaying numeric register values.
They present data in small enough characters to include 15 different
numeric registers on one screen. These screens are best suited for viewing
close-up. Data in standard character screens are updated once per second,
regardless of the update rate of the register on the connected device.
To set up a standard character screen:
1. Enter the parameter handle of the first register you want to display on
the screen, then press ENTER. If you want to keep the register that is
currently in use, press the button labeled KEEP PREVIOUS.
2. Repeat step 1 for the remaining 14 registers that you want to display. If
at any point you want to return to the main menu and c ancel your
changes, press the ESC button. You do not have to specify a handle for
every register if you do not want to use all 15 lines. Pressing ENTER will
skip a line; in the display screen, that line will be left blank.
3. Once you have entered the parameter handles, you are prompted for a
title for the display screen. Enter a title of up to 26 characters, then
press the ENTER button. If you want to keep the title that is currently in
use, press the button labeled KEEP PREVIOUS.
238)
If you have already set up a
standard character screen
and you want to change
only some of the registers
you are displaying, use the
KEEP PREVIOUS button to keep
the old registers.
The value in the
register is displayed
and updated once
per second.
The programmable
register label is displayed
(or the register name if
no label has been setup).
The title is displayed here.