2. To go back to the second level window for 9000 series meter
programming, click the Up A Level button.
Result: The second level window is displayed. The window lists all the
modules available in the selected group.
Linking Modules
This procedure describes how to use WinPM to link the input of one module
to the output of another module in your 9000 series meter. Do the following
to link modules:
1. From the View menu, select Device List.
Result: The Device List window is displayed.
2. On the Device List window, highlight the 9000 series power meter that
you want to configure.
3. Click the right mouse button, and then select Device Configuration from
the drop-down menu that is displayed.
Result: The 9000 Series Meter Configuration window of the selected
meter is displayed.
4. Click the Advanced button.
Result: The first level window for 9000 Series meter programming is
displayed. The window lists all the groups (types) of modules available
in the selected meter. WinPM displays each module type or group in
one folder. The folders are sorted in alphabetically order. Each group
consists of modules having similar functionality.
5. Double click a module group folder such as, Power Meter Modules.
Result: The second level window for 9000 Series meter programming is
displayed. The window lists all the modules available in the selected
group.
6. Double click a module folder such as, Power Meter module.
Result: The third level window for 9000 Series meter programming is
displayed. The window shows the details of the selected module, such
as input registers, output registers, and other modules connected to the
module.