Harmonics Screens
The harmonics screens allow you to display the values calculated by the
Harmonics Analyzer module. They appear in a histogram form to show the
harmonic spectrum of the input for which harmonics are being calculated.
To maximize the resolution of the display, the harmonic with the highest
amplitude is scaled to the top of the screen. The display is updated every
second.
To set up a harmonics screen:
1. Enter the handle of the first output register of the Harmonics Analyzer
module you want to view, then press ENTER. If you want to keep the
register that is currently in use, press the button labeled KEEP PREVIOUS.
2. Enter a title of up to 15 characters, then press the ENTER button. If you
want to keep the title that is currently in use, press the button labeled
KEEP PREVIOUS.
-14368%28
You only need to enter the
parameter handle for the
first harmonic; the MGT
automatically reads the re-
maining harmonic registers.
If you enter an incorrect
handle for the first output
register, the rest of the
readings will be
unpredictable
The title of the
screen is displayed
here.
This button toggles the display
of Odd harmonics on and off. It
is on when highlighted.
This button toggles the display
of Even harmonics on and off. It
is on when highlighted.
This button toggles the display
between thick lines and thin
lines.
When thick lines are selected,
this button scrolls between
harmonics 1 - 31 and