6. Steps 5 and 6 are repeated for the remaining three registers to be
displayed in the bar graph.
7. You are prompted to specify if you want to display min and max bars on
the bar graph. If you specified parameter handles in steps 5 or 6 and
you want to display these values, select 1, then press ENTER. If you have
not linked to any Minimum or Maximum modules, or you do not want to
display these values, select 0 and press ENTER.
6-Channel Bar Graph
The 6-channel bar graph displays six numeric register values in bar graph
form, and in number form. If you are displaying high-accuracy registers, the
graph is updated every second. If you are displaying high-speed registers
without minimum and maximum values indicated, the graph is updated
every 100 ms (with the minimum and maximum values displayed, the
update rate is 1 second).
238)
The minimum and
maximum values attained
by the register are not the
same as the minimum and
maximum boundaries of the
scale.
The value in the
register is represented
by the position of the
The low boundary of the
scale for the first 3
registers is shown here.
The high boundary of
the scale for the first 3
registers is shown here.
The register label is
displayed (or the
register name if no
label has been setup).
The value in the
register is shown here.
Optional min/max bars
are displayed as
and symbols.
Title 1 is displayed here.
Title 2 is displayed here. The high boundary of the
scale for the second 3
registers is shown here.
The low boundary of the
scale for the second 3
re
g
isters is shown here.