Siemens 7.3 Electro-MagneticCompatibility (EMC), 7.4 Environmental Aspects, Transport and Storage, Dismantling and Disposal, Documentation

7. Supplementary Information English

7.3 Electro-Magnetic Compatibility (EMC)

Class 2: Filtered Industrial (Class A)

This level of performance will allow the manufacturer/assembler to self-certify their apparatus for compliance with the EMC directive for the industrial environment as regards the EMC performance characteristics of the power drive system. Performance limits are as specified in the Generic Industrial Emissions and Immunity standards EN 50081-2 and EN 50082-2.

EMC Phenomenon	Standard	Level
Emissions:
Radiated Emissions	EN 55011	Level A1
Conducted Emissions	EN 55011	Level A1
Immunity:
Supply Voltage Distortion	IEC 1000-2-4 (1993)
Voltage Fluctuations, Dips, Unbalance,	IEC 1000-2-1
Frequency Variations
Magnetic Fields	EN 61000-4-8	50 Hz, 30 A/m
Electrostatic Discharge	EN 61000-4-2	8 kV air discharge
Burst Interference	EN 61000-4-4	2 kV power cables, 2 kV control
Radio Frequency Electromagnetic Field,	ENV 50 140	27-1000 MHz, 10 V/m, 80% AM,
amplitude modulated		power and signal lines

Class 3: Filtered - for residential, commercial and light industry (Class B)

This level of performance will allow the manufacturer / assembler to self-certify compliance of their apparatus with the EMC directive for the residential, commercial and light industrial environment as regards the EMC performance characteristics of the power drive system. Performance limits are as specified in the generic emission and immunity standards EN 50081-1 and EN 50082-1.

EMC Phenomenon	Standard	Level
Emissions:
Radiated Emissions	EN 55022	Level B1
Conducted Emissions	EN 55022	Level B1
Immunity:
Electrostatic Discharge	EN 61000-4-2	8 kV air discharge
Burst Interference	EN 61000-4-4	1 kV power cables, 0.5 kV control

Note: The CombiDrive® is intended exclusively for professional applications. Therefore, it does not fall within the scope of the harmonics emissions specification EN 61000-3-2.

7.4 Environmental Aspects

Transport and Storage

Protect the CombiDrive® against physical shocks and vibration during transport and storage. The unit must also be protected against water (rainfall) and excessive temperatures (see section 6).

The packaging is re-usable. Retain the packaging or return it to the manufacturer for future use.

Dismantling and Disposal

The component parts can be recycled, disposed of in accordance with local requirements or returned to the manufacturer.

Documentation

This handbook is printed on chlorine-free paper which has been produced from managed sustainable forests. No solvents have been used in the printing or binding process.

© STÖBER plc 1997

33 05.02.01