100 BAKE

Using the Oven

Operation

Setting the Cooking Mode and Temperature

Using the Timer

Operation - Oven

Note: To back out of a current mode, press OFF. (Selecting OFF when not setting the cooking mode will turn the oven off.)

1.

Press COOKING MODE.

 

 

 

2.

BAKE will flash in the display.

6: 35PM

 

 

 

 

3.

If no change is made within 5 seconds,

380

control will beep and flash. If this occurs, press START.

4.To change the cooking mode, turn knob.

5.Press START.

6.The selected mode will appear in the display, along with the default tempera- ture for that mode, which will be blinking.

7.To select a different temperature, turn knob to the right or left (in 5° incre- ments) to desired temperature.

8.Press START. If not pressed, oven automatically turns on in 5 seconds.

9.The display alternates between the cooking mode and preheat.

The preheated temperature is displayed, starting at 100ºF. The actual temperature increases until set temperature is reached, at which point the oven will beep.

10.To change temperature during cooking, press Temperature. Turn the knob to select new Temperature and press START.

11.Once cooking has been completed, press OFF to turn off oven.

Note: After the oven has been turned off, HOT appears in the display where the cooking mode was to indicate that the oven is off but still hot. When the oven temperature drops below 176° F, HOT is no longer seen in the display.

Notes:

If you do not finish setting the timer, the oven will beep periodically as a reminder to set time. Press OFF to exit the TIMER mode. (Selecting OFF when not setting the timer will turn the oven off.)

Turn the knob to display the time of day or further information about the oven mode when the timers are in use.

To set the timer:

1. Press TIME and TIMER 1 will flash in display.

 

 

0: 00

 

 

 

Turn clockwise and TIMER 2 will be displayed.

 

 

 

TIMER

1

 

 

 

 

 

 

 

Select TIMER 1 or 2, then press TIME. SET

 

 

 

 

 

 

1: 00

 

 

 

TIMER 1 (2) appears in display. Minutes flash.

HR:MIN

SET TIMER

2

 

 

2.

Turn knob to set minutes. If setting only minutes,

 

2: PM

 

 

 

 

press Start. Otherwise, continue to step 4.

 

 

3.

Press Time again and the hours will flash.

 

 

 

SET TIMER

2

HR:MIN

4.

Turn knob to set hours.

 

 

 

 

 

5.

Press Time again. The TIMER is now set.

 

 

 

 

 

6.

If Time or Start is not pressed, oven will begin beeping and timer display will

 

begin flashing.

 

 

 

 

 

English 17