Table of contents |
| |
1 | About this document | 3 |
1.1 | Revision history | 3 |
1.2 | Reference documents | 3 |
1.3 | Before you start | 3 |
1.3.1 | Copyright | 3 |
1.3.2 | Quality assurance | 3 |
1.3.3 | Document use / request to the reader | 4 |
2 | Summary | 5 |
2.1 | Brief description | 5 |
2.2 | Types and features | 5 |
2.3 | Equipment combinations | 6 |
2.4 | Accessories | 7 |
2.5 | Ordering | 7 |
3 | Use | 7 |
4 | Functions | 8 |
4.1 | Temperature control | 8 |
4.2 | Operating modes | 9 |
4.3 | Setpoints | 10 |
4.4 | Setpoints and sequence | 11 |
4.5 | Applications overview | 13 |
4.6 | Additional features | 14 |
4.7 | Control sequences | 17 |
4.7.1 | Applications and sequences | 17 |
4.7.2 | Sequences overview (setting via parameter P01) | 17 |
4.7.3 | Control outputs overview (setting via DIP 4 / 5 and parameters P46 / P47) | 18 |
4.7.4 | Single duct | 19 |
4.7.5 | Single duct with electrical heater | 20 |
4.7.6 | Single duct with radiator or floor heating | 21 |
4.7.7 | Single duct with heating / cooling coil | 22 |
4.8 | Control outputs | 23 |
4.8.1 | Control output for air flow | 23 |
4.8.2 | Control output for electrical heater, radiator and heating / cooling coil | 24 |
4.9 | Multifunctional input, Digital input | 26 |
4.10 | Handling of faults | 27 |
4.11 | DIP switches | 27 |
4.12 | Control parameters | 28 |
4.12.1 | Parameters Service level | 29 |
4.12.2 | Parameters Expert level, diagnostics & test | 30 |
5 | Handling | 32 |
5.1 | Mounting and installation | 32 |
5.2 | Operation | 33 |
5.3 | Disposal | 34 |
6 | Engineering | 35 |
6.1 | Connection terminals | 35 |
6.2 | Connection diagrams | 36 |
7 | Mechanical design | 37 |
7.1 | General | 37 |
7.2 | Dimensions | 37 |
8 | Technical data | 38 |
Index | ........................................................................................................................... | 40 |
2 / 42
Siemens | RDG100, RDG100T, RDG110, RDG140, RDG160 Basic Documentation | CE1P3182en |
Building Technologies | Table of contents | 28 May 2009 |
