Sigma S2Ca, S2Ba warranty 3Technical data, 3.1Technical data Sigma/ 3.1.1Capacity data

Dulcodes UV-Desinfektionsanlage Technical data

3Technical data

3.1Technical data Sigma/ 2

3.1.1Capacity data

Technical data S2Ba at 50 Hz operation

		Feed rate at		Max.	Suction	Admissible	Connection	Shipping
		maximum		stroke	lift	priming	suction /	weight
		back pressure		rate		pressure	discharge
						suction side	side
Pump type Sigma/	bar	l/h	ml/stroke	strokes/min.	m Ws	bar	G - DN	kg
12050 PVT	10	50	11.4	73	7	3	1"-15	15
12050 SST	12	48	11.4	73	7	3	1"-15	20
16050 SST	16	48	11.4	73	7	3	1"-15	20
12090 PVT	10	90	11.4	132	7	3	1"-15	15
12090 SST	12	86	11.4	132	7	3	1"-15	20
16090 SST	16	86	11.4	132	7	3	1"-15	20
12130 PVT	10	130	10.9	198	7	3	1"-15	15
12130 SST	12	125	10.9	198	7	3	1"-15	20
16130 SST	16	125	10.9	198	7	3	1"-15	20
07120 PVT	7	120	27.4	73	5	1	20*	16
07120 SST	7	120	27.4	73	5	1	20*	24
07220 PVT	7	220	27.7	132	5	1	20*	16
07220 SST	7	220	27.7	132	5	1	20*	24
04350 PVT	4	350	29.4	198	5	1	20*	16
04350 SST	4	350	29.4	198	5	1	20*	24

All performance data applies to water at 20 °C.

The suction lift applies when the suction line and liquid end are full and correctly installed.

*Sigma types 07120, 07220 and 04350, the valves used in the liquid end are DN 25 (G11/2). Since DN 20 is usually adequate for this tubing (see Technical Data, connection-suction/discharge side) the connector parts to be ordered by Identcode (e.g. washers) have already been reduced to DN 20, i.e. tubing and accessories can be DN 20.

Technical data S2Ba at 60 Hz operation
		Feed rate at		Max.	Suction	Admissible	Connection	Shipping
		maximum		stroke	lift	priming	suction /	weight
		back pressure		rate		pressure	discharge
						suction side	side
Pump type Sigma/	bar	psi	I/h/gph	strokes/min.	m Ws	bar	G - DN	kg
12050 PVT	10	145	60/ 15.9	87	7	3	1"-15	15
12050 SST	12	174	57/ 15.2	87	7	3	1"-15	20
16050 SST	16	232	57/ 15.2	87	7	3	1"-15	20
12090 PVT	10	145	108/ 28.5	156	7	3	1"-15	15
12090 SST	12	174	103/ 27	156	7	3	1"-15	20
16090 SST	16	232	103/ 27	156	7	3	1"-15	20
12130 PVT	10	145	156/ 41	232	7	3	1"-15	15
12130 SST	12	174	150/ 39.6	232	7	3	1"-15	20
16130 SST	16	232	150/ 39.6	232	7	3	1"-15	20
07120 PVT	7	100	144/ 38	87	5	1	20*	16
07120 SST	7	100	144/ 38	87	5	1	20*	24
07220 PVT	7	100	264/ 69.7	156	5	1	20*	16
07220 SST	7	100	264/ 69.7	156	5	1	20*	24
04350 PVT	4	58	420/ 111	232	5	1	20*	16
04350 SST	4	58	420/ 111	232	5	1	20*	24

All performance data applies to water at 20 °C.

The suction lift applies when the suction line and liquid end are full and correctly installed.

*Sigma types 07120, 07220 and 04350, the valves used in the liquid end are DN 25 (G11/2). Since DN 20 is usually adequate for this tubing (see Technical Data, connection-suction/discharge side) the connector parts to be ordered by Identcode (e.g. washers) have already been reduced to DN 20, i.e. tubing and accessories can be DN 20.

ProMinent® Page 25