Sigma S2Ba, S2Ca warranty 6Control elements, Dulcodes UV-Desinfektionsanlage

Features of the S2Ca metering pumps / Control elements Dulcodes UV-Desinfektionsanlage

Fig. 17 Fig. 18

6Control elements

Please acquaint yourself with the S2Ca control elements with the help of the “control elements and key functions” overview!

Indicators The LCD display supports the operation and setting of the S2Ca with a range of indicators:

Stop Aux Pause Error

Mem

Calib

Flow

Set

The indicators are interpreted as follows:

Symbol for P key:	The S2Ca is in settings mode.
Close symbol:	In a continuous display: lock (if code has been set).
	In settings mode: indicates access to code menu.
Stop:	The S2Ca has been stopped using the STOP/START key.
Aux:	The S2Ca is pumping at the auxiliary frequency. In AUX menu:
	the S2Ca is in the AUX menu.
Pause:	The S2Ca has been stopped using the “pause” function
	(external).
Error:	A fault has occurred and the pump has been stopped.
Mem:	An additional “memory” function has been set in the “contact”
	and “batch” operating modes.
	In CNTCT or BATCH menus (“mem” flashes): the memory
	function can be set.
Calib:	The S2Ca is in the CALIB menu.
	In a continuous display (“calib” flashes”): Deviation from the
	stroking rate from the value at the time of the calibration by
	more than 10 percent (e.g. in the case of a stroke length of 40%
	when it has been set to less than 30% or more than 50%).
Flow:	The S2Ca is in the FLOW menu.
Set:	The S2Ca is in the SET menu.
Exclamation mark:	The number of strokes reached is above the maximum value
	(99999) that can be shown in the LCD display.

NOTE

When calibrated, the S2Ca displays the feed rate and the feed capacity in l and/or in l/h or in gal and/or g/h.

Page 42 ProMinent®