2Only for mains power operation: Insert the DC plug (barrel plug) of a suit- able power adapter into the socket »DC 5V 0.5A« U on the voice recorder. A power adapter is not supplied. Pay heed to the correct polarity of the DC plug. For this voice recorder, a suitable power adapter must have a positive po- larity. Insert the plug of the power adapter into a mains power socket.
‹†Danger! | › |
For mains power operation of the voice recorder use exclusively a suitable power adapter; Output voltage:
5 V DC, Output current: 500 mA,
. Suitable power adapters are available in electronic and audio/video specialist shops. Should the voice recorder be used with an unsuitable power adapter, there is the risk of you receiving an electric shock! Additionally, the voice recorder could be irreparably damaged!
2Only for USB operation: Check to ensure the PC is switched on. Insert the small plug of the supplied USB cable into the USB interface » « K on the voice recorder. Insert the large plug of the USB cable into a free USB interface on your PC. If batteries/cells have not been inserted into the battery com- partment of the voice recorder: Immediately switch the voice recorder on by pressing the button "On/Off" A. If batteries/cells have been inserted into the battery compartment: Switch the voice recorder on before connecting it to the PC. If you do not, the voice recorder will switch over to PC operation and will be identified by the PC as a removable media. In PC operation, dictations from the voice recorder can be copied onto the PC; for this, see also chapter 10. »Copying dictation recording from the voice recorder to a PC«. However, in PC operation the voice recorder cannot be used for dictations. Additionally, in PC operation you cannot utilise the menu or any of the other adjustments for the voice recorder.
3Switch the voice recorder on by pressing the button "On/Off" A. In the display Q the battery selection screen appears:
Type of battery
Non-rechargeable
battery
OK | ESC |
11 
