Silvercrest KH 2450 manual Switching the voice recorder off, Recording dictation

7.2 Switching the voice recorder off

Hold the button »ON/OFF« A pressed down until »Off« appears in the display Q. The voice recorder then switches itself off.

7.3 Recording dictation

1Switch the voice recorder on by pressing the button »ON/OFF« once. As soon as the start screen is shown in the display Q:

2Place the multi-function slider H at » STOP«.

3Then select, by pressing the function button A W, »NEW«. The voice recorder now allocates a new dictation reference with a successive number.

‹]Notice: ›

Every new dictation recording is saved under a new, successive number. However, take note: The numbering of saved dictations does not subsequently change when you delete individual dictations.

‹ÚExample: ›

You start a new dictation recording. This is automatically assigned the number »DICT001«. At a later date you delete dictation recording »DICT001«. When you start a new dictation recording, this one is automatically as- signed the next following number, »DICT002«, although the dictation with the prior number, »DICT001«, has been deleted.

You can however reset the dictate counter back to null. After the resetting of the counter, the subsequent dic- tations will again be automatically successively numbered, beginning at »DICT001«. The resetting of the in- ternal counter for dictations is explained in chapter 8.13 » Resetting the internal dictation counter«.

However, the dictation recording does not start immediately, instead, at first it is in a pause-mode. The status lamp »DICT « D blinks; in the display Q is indicated:

16