Before taking it into use …

Úthe software must first of all be installed on the PC.

Úthe voice recorder must be connected with the supplied USB cable to a USB in- terface on the PC.

]Notice:

The steps towards installing and using the software »Convert« will be shown for the case of the operating system Windows® XP. They are valid in a comparable form for the operating systems Windows® 2000 and Vista™.

Deactivate the anti-virus programme possibly installed on your PC before installing the software »Convert«. Otherwise, it could potentially cause problems with the installation. Absolutely remember to reactivate the anti-virus programme after the successful installation of the software »Convert«. In a case of doubt, consult the operating handbook for the anti-virus programme.

10.1 Installing the software »Convert« onto a PC

To install the software:

1Switch the PC on and wait until the operating system has booted.

2Installation of the software requires a minimum of 6 MB of free disc space on the hard drive.

3Place the supplied CD-ROM into the CD-ROM drive of the PC to which you wish to copy dictation recordings from the voice recorder.

Should the function »AutoPlay« be activated on your PC: On the PC monitor a window opens automatically with the content of the CD-ROM.

If the function »AutoPlay« is not activated: Klick on »Start«, then on »My Computer«. Subsequently, double-click on the CD-ROM drive in which the CD has been inserted. On the PC monitor a window opens automatically with the content of the CD-ROM.

4The following window appears on the PC monitor:

61

Page 59
Image 59
Silvercrest KH 2450 manual Installing the software »Convert« onto a PC