MESSAGES ON LCD
1.Winding the bobbin.
2.Lower the buttonhole lever.
3.After sewing buttonhole, raise the presser foot lifter and set the frame of buttonhole foot to starting position.
4.Release the foot controller pedal.
5.Lower the presser foot.
6.Machine memory is full.
7.Select a pattern.
8.Release the reverse button.
9.Release the start/stop button.
10.Rethread the upper thread.
11.Foot controller is connected.
12.Release the needle
13.Release the thread cutter button.
14.Turn off the power switch.
102
1
2
3
4
5
6
7
8
9
10
11
12
13
14
