![](/images/new-backgrounds/1061342/6134259x1.webp)
D. INSERTING THE BOBBIN
1.Place bobbin into bobbin holder, making sure the bobbin turns in a counter clockwise direction.
2.Draw thread into notch (a) while holding the bobbin.
3.Pull thread along the groove up and then down. Pull thread to the right to cut the thread.
4.Replace the bobbin cover. Set the left tabs into the holes in needle plate and push the right side of bobbin cover down until it clicks into place.
NOTE:
This machine can start to sew without drawing up the bobbin thread.
If you want to draw up the bobbin thread, see page 34.
NOTE:
Be sure to use only SINGER Class 15 bobbins in this machine.
a |
30