Sony CX-ZR525 manual ‘Programmed Edit Recording, 23,7,8,9, 3,5,7 18,9 8Jo, tracks for side B

‘PROGRAMMED EDIT RECORDING

The programmed edit function enables CD recording while

checking the remaining time on each side of the tape as the

tracks are programmed.

5

4

23,7,8,9

5

3,5,7,

18,9

8Jo

1 Insert the tape into deck 1 and wind up to the beginning of the front side.

Insert the tape with the side to be recorded first facing out

from the unit, and wind up the tape with the 4 button.

‘2 Press the CD button and load the disc(s).

3 Press the EDIT/CHECK button twice while pressing the SHIFT button on the remote control.

PRGM and E[)IT are displayed.

4 Press the numeric buttons on the remote control to designate the tape length.

10 to 99 minutes can be specified.

Example: When using a 60-minute tape, press the 6 and O

buttons.

Tape length Tape side A (front side)

Maxim~m recording time for side A

5 Press one of the DISC DIRECT PLAY buttons to select a disc and press the numeric buttons to program a track.

To select disc 4 or 5 from the remote control, press the DISC DIRECT PLAY 4 or 5 button while pressing the SHIFT button. Example: To select the 10th track of disc 2, press DISC DIRECT PLAY 2 and the numeric buttons+ 10 and O.

6 Repeat step 5 for the rest of the tracks for side A.

A track whose playing time is longer than the remaining time cannot be programmed.

Total number	of	Programmed
programmed	tracks	tracks
		I

Remain~ng time

of side A

7Press the EDIT/CHECK button while pressing the SHIFT button to select side B and program the

tracks for side B.

After confirming B on the display, repeat step 5.

8Press the EDIT/CHECK button while pressing the SHIFT button to select side A and press the ●

button on deck 1 to start recording.

CD play and recording of edited tracks for the first side start simultaneously. When the end of the tape is reached, deck 1 enters the recording stop mode. After entering the recording stop mode, go to step 9.

9Press the EDIT/CHECK button while pressing the SHIFT button on the remote control for recording

of the second side.

After confirming B on the display, go to step 10.

10 Turn over the tape in deck 1 and press the ●

button.

~flashes for 10 seconds, and then recording starts.

To stop recording

Press the WA button on deck 1. Recording and CD play stop simultaneously.

To check the order of the programmed track numbers

Before recording, press the EDIT/CHECK button while pressing the SHIFT butte; to select side A or B, and press the M DOWN or FM UP button repeatedly.

Disc number Tape side Program number

Track number	Programmed	track
	numbers

To chanae the moaram of each side

Press the-EDIT/CHE~K button while pressing the SHIFT button to select side A or B, and press the ■ CLEAR button to clear the program of the selected side. Then program tracks again.

To clear the edited program

Press the 9CLEAR button twice in stop mode so that EDIT

disappears on the display.

m

The edit function cannot be used with discs containing 31 tracks or more.

ENGLISH 14