
operation when the audio recording mode selected on this unit does not coincide with that of the loaded tape.
EDIT MODE: Lights when this unit is set in editing mode such as assemble editing or insert editing under the control of either an editing control unit connected to the REMOTE connector or device connected to the
HDV/DV connector on the rear panel (see page 21).
dRepeat (repeat playback) indicator
Lights when the REPEAT MODE menu item (see page 73) is set to ON to enable the repeat playback function.
eTime data type indicator
Indicates the type of time data currently shown in the time counter display.
TC: SMPTE timecode
UB: User bit data
CNT: Count value of the time counter
VITC: VITC timecode
VIUB: VITC user bit data
fVITC indicator
Lights when VITC is being read or recorded regardless of time data shown in the time counter display.
gRecording/playback signal format display Indicates the recording/playback video format.
h
When converting the recording signal format on the tape for output from the
iInput signal display
Indicates the signal formats of video and audio inputs selected with the buttons (i.LINK, VIDEO, CH1 1/2, CH2 3/4) in video/audio input selection section.
First (top) line: Video area (Indicates the signal format of video input.)
Second and third lines: Audio area (Indicates the signal formats of the audio inputs.)
When there is no signal in the selected input, the corresponding input signal indication flashes.
Note
The indicators without the corresponding option board installed in the unit do not light.
• When i.LINK input is selected:
Indicator in video | Signal format |
area |
|
i.LINK:HDV | The digital video and audio signals in |
| |
| selected. |
|
|
Indicator in video | Signal format |
area |
|
i.LINK:DV or | The digital video and audio signals in |
i.LINK: DVACAM 1) | |
| are selected. |
|
|
1)The display follows the recording format setting in the REC FORMAT menu item (see page 74).
• When video input is selected:
Indicator in | Signal format |
video area |
|
COMPOSITE | Composite video signal (optional |
| |
|
|
S VIDEO | |
| (optional |
|
|
COMPONENT SD | Y, |
| signals (optional |
| required) |
|
|
SDI | SDI video signal |
|
|
SG | Video test signal (factory default |
| setting) |
|
|
• Audio:
The audio inputs for CH1 1/2 and CH2 3/4 can be selected respectively. The following table shows the relationship between the audio area indications and the signal selection.
Indicator in | Signal format |
audio area |
|
The indicator corresponding to the | |
(ANALOG, AES/ | signal format selected for audio input to |
EBU, SDI, SG) | channel 1 (when in |
| to channels 1 and 2 (when in |
| mode) lights. |
| ANALOG: Analog audio signal |
| (optional |
| required) |
| AES/EBU: Digital audio signal in AES/ |
| EBU format |
| SDI: |
| SG: Audio test signal (factory default |
| setting) |
|
|
The indicator corresponding to the | |
(ANALOG, AES/ | signal format selected for audio input to |
EBU, SDI, SG) | channel 2 (when in |
| to channels 3 and 4 (when in 4- channel |
| mode) lights. |
| ANALOG: Analog audio signal |
| (optional |
| required) |
| AES/EBU: Digital audio signal in AES/ |
| EBU format |
| SDI: |
| SG: Audio test signal (factory default |
| setting) |
|
|
Overview 1 Chapter
Names and Functions of Parts 17