9 Press the m button to select A PRESET.
SETUP MENU | >> REPEAT MD | |||
OPERATIONAL | FUNCTION | |||
REPEAT FUNCTION | Time counter display | |||
REPEAT | MODE | :OFF |
|
|
REPEAT | TOP | :T . TOP |
| |
REPEAT | END | :V . END |
| |
APRESET
BPRESET
Monitor screen
5 Press the m button to select REPEAT TOP.
SETUP MENU
OPERATIONAL FUNCTION
REPEAT FUNCTION REPEAT MODE :OFF REPEAT TOP :A REPEAT END :V . END
A PRESET
B PRESET
Monitor screen
10Press the ,/B button.
>> A preset
Time counter display
| SETUP MENU | >> REP TOP | |||
OPERATIONAL | FUNCTION | ||||
REPEAT FUNCTION | Time counter display | ||||
REPEAT | MODE | :OFF |
| ||
|
|
|
| ||
REPEAT | TOP | :T . TOP |
|
| |
REPEAT | END | :V . END |
| ||
A | PRESET |
|
|
| |
B | PRESET |
|
|
| |
The A PRESET MODE screen appears. The timecode value of the current point A is displayed below the screen title.
Monitor screen
A PRESET MODE
A00:00:00:00
REPEAT TOP
00:00:00:00
Time counter display
3 Chapter
6 Press the ,/B button.
The display changes as follows.
SETUP MENU
OPERATIONAL FUNCTION
REPEAT FUNCTION REPEAT TOP :T . TOP
* TAPE TOP
A POINT
Monitor screen
>>> Tape top
Time counter display
INC/DEC : ( )( )KEY
SHIFT : ( )( )KEY
CLEAR : RESET KEY
DATA SAVE : SET KEY
TO MENU : MENU KEY
Monitor screen
11Press the </A or ,/B button to select the digit in the timecode value display that you want to change.
Each press of the button causes the digit to the left or right to begin flashing.
Holding the button down moves the flashing digit continuously.
Playback and Recording
7 Press the m button to select A POINT.
SETUP MENU | >>> A point | |
OPERATIONAL | FUNCTION | |
REPEAT FUNCTION | Time counter display | |
REPEAT | TOP :T . TOP |
|
*TAPE TOP
A POINT
Monitor screen
If you want to clear the timecode value, press the RESET (NO) button. The value is cleared to 00:00:00:00, and the leftmost digit begins flashing.
12Press the M or m button to increment or decrement the value of the flashing digit.
Each press of the button increments or decrements the value. Holding the button down increments or decrements the value continuously. To change other digits, return to step 11.
8 Press the </A button.
The display changes as follows.
SETUP MENU
OPERATIONAL FUNCTION
REPEAT FUNCTION
REPEAT MODE :OFF
REPEAT TOP :A
REPEAT END :V . END
APRESET
BPRESET
>> REP TOP
Time counter display
13Press the SET (YES) button to confirm the defined value.
The message “NOW SAVING...” is displayed on the monitor screen and “Saving...” is shown in the time counter display while the new setting is being saved in memory.
Caution
Monitor screen
The new setting may be lost if you power off the unit during the saving operation. Wait until the saving operation is completed before powering the unit off.
Playback 49