Connections for a Linear Editing System

Notes

When using this unit as the recorder for editing in DVCAM format:

•It is not possible to carry edit audio channels separately. However, if all audio channels are selected, insert editing is possible.

•For the audio edit points, you can select a cut or fade-in/ fade-out by menu selection.

•For linear editing using an i.LINK input, if controlled through the RS-422A interface, the edit points are offset. Use i.LINK for the control too.

When using this unit as the player for playback in HDV format:

When using this unit as an HD linear editing player, this unit does not support synchronization. Either turn the controller’s player synchronization function off, or set it to “Preroll & Play.”

Note

A tape recorded in HDV format cannot be edited with this unit when using this unit as the recorder in an editing system.

Editing for Settings and Connections 5 Chapter

Editing in DVCAM Format Using an External Controller

Using an RM-280

The following figure shows an example of the connections for a DVCAM format linear editing system connected to an RM-280 editing controller, with a DSR-1500A/1500AP as the player, and this unit as the recorder.

58 Connections for a Linear Editing System