Overview 1 Chapter

3 Digital signal input/output section

1 SDI IN connector

2SDI OUT1, OUT2 connectors 4 AUDIO (AES/EBU) IN 1/2, 3/4 connectors

 

 

3 HD-SDI OUT1, OUT2

 

5 AUDIO (AES/EBU) OUT 1/2, 3/4

 

 

connectors

 

connectors

IN

OUT1

OUT2 SDI OUT1

OUT2 HD-SDI

IN AUDIO I/O (AES/EBU)

OUT

 

 

 

1/2

3/4

1/2

3/4

aSDI IN (Serial Digital Interface input) connector (BNC type)

This connector inputs digital video and audio signals in SDI format (SD). To select the required input signal formats, use the VIDEO button in the video/audio input selection section (see page 14).

The current input signal selections are indicated in the input signal display (see page 17).

bSDI OUT1, OUT2 (SDI signal output 1, output 2) connectors (BNC type)

These connectors output video and audio signals in SDI format (SD).

cHD-SDI OUT1, OUT2 (HD Serial Digital Interface output1, output2) connectors (BNC type)

These connectors output video and audio signals in HD- SDI format.

Note

A signal is output from the HD-SDI connector only when a tape recorded in HDV format is played. When playing a tape recorded in DVCAM (DV) format, in E-E mode, or during recording, this output signal is suppressed.

dAUDIO (AES/EBU) IN (digital audio input) 1/2, 3/ 4 connectors (BNC type)

These connectors input digital audio signals in AES/EBU format.

The left connector (1/2) is for audio channels 1 and 2, and the right connector (3/4) is for audio channels 3 and 4.

eAUDIO (AES/EBU) OUT (digital audio output) 1/ 2, 3/4 connectors (BNC type)

These connectors output digital audio signals in AES/EBU format.

The left connector (1/2) is for audio channels 1 and 2, and the right connector (3/4) is for audio channels 3 and 4.

DTimecode input/output section

1 TC IN connector

2TC OUT connector

TC IN

OUT

aTC IN (timecode input) connector (BNC type) This connector inputs externally generated SMPTE timecode.

bTC OUT (timecode output) connector (BNC type) This connector outputs a timecode according to the operating state of the unit, as follows.

During playback: the playback timecode

During recording: the timecode generated by the internal timecode generator or the timecode input to the TC IN connector. When the EE OUT PHASE menu item (see page 78) is set to NO OUTPUT, no timecode is output.

24 Names and Functions of Parts