Sony HVR-1500 manual 82

Menus 7 Chapter

AUDIO CONTROL [Audio]: Settings related to audio		Description of settings
control
LEVEL SELECT [> Level Sel]	REF LEVEL [>> REF Level]:	*–20 dB [>>> –20dB]: Set to –20 dB.
	Select the audio	–18 dB [>>> –18dB]: Set to –18 dB.
	reference level	–16 dB [>>> –16dB]: Set to –16 dB.
	(headroom) for recording	–12 dB [>>>–12dB]: Set to –12 dB.
	on tape.
		Notes
		•	This		setting is valid in DVCAM format only. When the
			recording format is DV, the reference level is fixed at
			–12 dB.
		•	When the system frequency is set to 50i, factory default
			setting value is set to –18 dB.
	CH1 IN LEVEL [>> CH1	*+4 dB [>>> +4dB]: Set to +4 dB.
	input]: Select the audio	0 dB [>>> 0dB]: Set to 0 dB.
	level setting according to	–3 dB [>>> –3dB]: Set to –3 dB.
	the audio level of the	–6 dB [>>> –6dB]: Set to –6 dB.
	signal input to the AUDIO
		Note
	IN 1/3 connector.			is displayed only when the system frequency is set to
		–3 dB
		50i.
	CH2 IN LEVEL [>> CH2	*+4 dB [>>> +4dB]: Set to +4 dB.
	input]: Select the audio	0 dB [>>> 0dB]: Set to 0 dB.
	level setting according to	–3 dB [>>> –3dB]: Set to –3 dB.
	the audio level of the	–6 dB [>>> –6dB]: Set to –6 dB.
	signal input to the AUDIO
		Note
	IN 2/4 connector.			is displayed only when the system frequency is set to
		–3 dB
		50i.
	OUTPUT LEVEL [>> Out	*+4 dB [>>> +4dB]: Set to +4 dB.
	Level]: Select the analog	0 dB [>>> 0dB]: Set to 0 dB.
	audio output reference	–3 dB [>>> –3dB]: Set to –3 dB.
	level.	–6 dB [>>> –6dB]: Set to –6 dB.
		Note
		–3 dB		is displayed only when the system frequency is set to
		50i.
INT AUDIO SG [> Audio SG]: Select the operation of the		SILENCE [>> silence]: Silent signal
internal audio test signal generator.		*1kHz SINE [>> 1kHz]: 1 kHz, –20 dB FSignal as the audio
			input in the video/audio input selection section on the front
			panel, the audio test signal generated by the internal audio
			test signal generator is input.

82 Menu Contents