1 Press the RESET (NO) button.
The factory default setting of “x 1” is selected.
2 Press the SET (YES) button.
The setting returned to its factory default is saved in memory as the current setting.
To return all settings to their factory default settings
1 Press the MENU button to display the menu selection level.
2 Press the ,/B button to display level 1 of the setup menu.
3 Press the RESET (NO) button.
A message appears, to confirm whether or not you wish to return all settings to their factory default settings.
Monitor screen | INITIALIZE ALL ITEMS TO |
message | FACTORY PRESET VALLUES? |
|
|
Message in the time | Init setup? |
counter display |
|
|
|
4 Press the SET (YES) button.
The message “NOW SAVING...” appears on the monitor screen, and “Saving...” appears in the time counter display, while the settings of all items are returned to their factory default settings. These factory default settings are saved in memory.
Note
If you power off the unit while settings are being saved, settings may not be correctly returned to their factory default settings. Wait until the saving is completed before powering off the unit.
To abandon the resetting operation
Instead of pressing the SET (YES) button, press the RESET (NO) button. The display returns to menu level 1, leaving the settings unchanged.
Assigning a Function to the ASSIGN Button
You can assign a desired menu item (level 1 or level 2) to the ASSIGN button. Once you assign a
Menu items that can be assigned to the ASSIGN button
Depending on the setting in MENU GRADE, you can assign menu item from level 1 and level 2 of the SETUP MENU. To assign ENHANCED menus, set the MENU GRADE to ENHANCED.
To assign a function to the ASSIGN button
Use the following procedure.
MENU ASSIGN RESET(NO)
1
TC
PRESETSET(YES)
8
4,6
A | B | 2,3,5,7 |
|
1 Press the MENU button.
The monitor screen shows the menu selection levels.
| SYSTEM MENU |
| Setup menu | |
|
|
| ||
SETUP | MENU |
| ||
|
| Time counter display | ||
AUTO | FUNCTION | |||
HOURS | METER | |||
|
| |||
|
|
|
| |
Monitor screen
2 With SETUP MENU selected, press the ,/B button.
All basic items in setup menu level 1 are displayed.
Menus 7 Chapter
Assigning a Function to the ASSIGN Button | 89 |
|
|