Playback and Recording 3 Chapter
If you want to discard the changed value Press the MENU button instead of pressing the SET (YES) button to return to the menu display, then press the MENU button again to end the menu operation without saving the changed value into memory.
After the saving operation is completed, the monitor screen and time counter display return to the REPEAT FUNCTION setting display as shown in step 9.
14To set point B, refer to steps 5 to 13.
(Select REPEAT END in step 5, B POINT in step 7, and B PRESET in step 9.)
15Press the MENU button to close the menu.
Cuing Up to Any Desired Position Set as Point A or B
You can set any desired tape position as point A or B and cue up to the set point when required.
Proceed as follows.
Cueing up to point A: Hold down the </A button, and press the F FWD button or REW button.
Cueing up to point B: Hold down the ,/B button, and press the F FWD button or REW button.
For the methods of setting points A and B, see “Setting the current tape position as point A or B” (page 48).
50 Playback