Insert TC and Dubbing for Connector LINK.i the Using 6 Chapter
Rerecording the
Timecode – TC Insert
Function (DVCAM Format
Only)
The TC insert function makes it possible to use the internal timecode generator to rewrite timecode or user bit data when the timecode recorded on a tape is discontinuous. When recording in DVCAM format, you can start recording timecode from an initial value (see page 51) which can be set freely.
Notes
•Use a tape which is recorded in the DVCAM format. (You cannot use the TC insert function with a tape recorded in HDV/DV format.)
•The timecode recording starts from the current tape position. Cue the tape up beforehand to the required start position.
•If you use a tape on which ClipLink log data is recorded, the ClipLink log data will be lost.
Press the TC PRESET button to set the initial value of the timecode to be inserted, then carry out the following procedure.
MENU ASSIGN RESET(NO)
1
TC
PRESETSET(YES)
7,8 2 
A | B | 3,5 |
|
2,4
1 Press the MENU button.
| SYSTEM MENU |
| Setup menu |
|
|
| |
SETUP | MENU |
| |
| |||
AUTO | FUNCTION |
| Time counter display |
HOURS | METER |
|
|
|
|
|
|
Monitor screen
2 Press the M or m button to select AUTO FUNCTION.
| SYSTEM MENU |
| Auto func |
SETUP | MENU |
| |
|
| Time counter display | |
AUTO | FUNCTION | ||
HOURS | METER |
|
|
|
|
|
|
Monitor screen
3 Press the ,/B button.
This displays the items in the level 1 of the AUTO FUNCTION (auto mode execution menu).
AUTO FUNCTION MENU |
| i.LINK DUB | |
i . LINK DUBBING :HDV |
| ||
i . LINK DUBBING :DV/DVCAM | Time counter display | ||
TC INSERT :DVCAM | |||
|
| ||
|
|
| |
Monitor screen
4 Press the m button to select TC INSERT: DVCAM.
AUTO FUNCTION MENU |
| TC insert |
i . LINK DUBBING :HDV |
| |
i . LINK DUBBING :DV/DVCAM |
| Time counter display |
|
|
|
TC INSERT :DVCAM |
|
|
|
|
|
Monitor screen
5 Press the ,/B button.
The following message appears.
TC INSERT | :DVCAM |
|
| Set tape! |
|
|
|
| |
INSERT THE | TAPE | IN |
| Time counter display |
THIS | VTR . |
|
| |
|
|
| ||
ABORT: MENU | KEY |
|
| |
|
|
|
|
|
Monitor screen
68 Rerecording the Timecode – TC Insert Function (DVCAM Format Only)