Menus 7 Chapter

 

INTERFACE SELECT [Interface]: Settings related to

 

Description of settings

 

 

external interfaces

 

 

 

 

 

 

i.LINK OUTPUT [> i.Link Out]: When playing a tape recorded

 

*HDV [>> HDV]: Output in HDV format.

 

 

in HDV format, set the format output from the HDV/DV

 

DV (SP) [>> DV (SP)]: Down-convert and output in DV format.

 

 

connector.

 

 

DVCAM [>> DVCAM]: Down-convert and output in DVCAM

 

 

 

 

 

 

format.

 

 

 

 

 

 

 

 

 

 

Note

 

 

 

 

 

 

Before

changing the setting, either temporarily disconnect the

 

 

 

 

 

i.LINK cable or power off the connected device.

 

 

 

 

 

 

 

 

 

 

 

DOWN CONVERTER [>

CONV MODE [>> D-Con

 

SQUEEZE [>>> Squeeze]: Select the squeeze mode.

 

 

Down Conv]: Select the

Mod]: Select conversion

 

*EDGE-CROP [>>> Edge Crp]: Select the edge crop mode.

 

 

aspect ratio conversion

mode.

 

 

 

 

 

mode for HDV down-

 

 

 

 

 

 

CROP POSI [>> Crop Posi]:

 

0 [>>> 0] to +B4 [>>> B4]

 

 

conversion.

 

 

 

Control crop position.

 

Factory default setting: *5A

 

 

 

 

 

 

 

 

 

 

 

 

 

SDI H-ANC [> SDI H-ANC]:

RP188LTC [>> RP188LTC]:

 

OFF [>>> OFF]: Do not embed an LTC signal.

 

 

Select whether to add

RP188 timecode

 

*ON [>>> ON]: Output an embedded LTC signal.

 

 

RP188 LTC and aspect

 

 

 

 

 

 

ASPECT [>> ASPECT]:

 

OFF [>>> OFF]: Do not embed aspect ratio data.

 

 

ratio data to the ancillary

 

 

 

Aspect ratio data

 

*ON [>>> ON]: Output embedded aspect ratio data.

 

 

data space of the SDSDI

 

 

 

 

 

 

 

 

 

output.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SYSTEM SEL [System Sel]: Settings related to system

 

Description of settings

 

 

selection

 

 

 

 

 

 

Select system frequency to use.

 

*59.94i (UC) [> 59.94i UC]: For NTSC regions other than

 

 

 

 

 

 

Japan

 

 

 

 

 

 

59.94i (J) [> 59.94i J]: For Japan

 

 

 

 

 

 

50i (PAL) [> 50i PAL]: For PAL regions

 

 

 

 

 

 

 

 

 

 

 

 

 

Note

 

 

 

 

 

 

 

After

changing the setting, press the POWER switch to power

 

 

 

 

 

 

off the unit, then press once more to restart. This changes the

 

 

 

 

 

 

initial settings of the entire setup menu to the new setting.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SETUP BANK OPERATION [Setup Bank]: Settings related

 

Description of settings

 

 

to menu bank operations

 

 

 

 

 

 

 

 

 

 

 

 

 

Menu banks:

This unit allows four different complete sets of menu settings to be saved in what are termed “menu banks” numbered 1 to 4. Saved sets of menu settings can be recalled for use as required.

RECALL BANK1 [> Recall 1]: Recall menu settings from

(1) Select the bank you want to recall, then press the ,/B

menu bank 1.

button.

 

Message “RECALL OK?” appears.

RECALL BANK2 [> Recall 2]: Recall menu settings from

(2) To recall, press the SET (YES) button.

menu bank 2.

 

To quit recalling, press the RESET (NO) button.

RECALL BANK3 [> Recall 3]: Recall menu settings from

 

menu bank 3.

 

 

 

RECALL BANK4 [> Recall 4]: Recall menu settings from

 

menu bank 4.

 

 

 

SAVE BANK 1 [> Save 1]: Save current menu settings to

(1) Select the bank you want to save, then press the ,/B

menu bank 1.

button.

 

Message “SAVE OK?” appears.

SAVE BANK 2 [> Save 2]: Save current menu settings to

(2) To save, press the SET (YES) button.

menu bank 2.

 

To quit saving, press the RESET (NO) button.

SAVE BANK 3 [> Save 3]: Save current menu settings to

 

menu bank 3.

 

 

 

SAVE BANK 4 [> Save 4]: Save current menu settings to

 

menu bank 4.

 

 

 

84 Menu Contents