Recording and Playback Chapter3
Recording
This section describes the necessary settings and operations to perform recording on this unit.
For details of connections and settings when using this unit as part of an editing system, see Chapter 5, “Connections and Settings for Editing” (page 55).
For details of use for dubbing through the i.LINK interface, see Chapter 6, “Using the i.LINK Connector for Dubbing and TC Insert” (page 64).
For this unit, recording in HDV or DVCAM format is recommended, but recording in DV (SP mode only) format is also possible.
Notes
•When carrying out multiscene continuous recording on a DV (SP) tape using this unit with an optional remote control unit such as the
There may also be cases in which the unit is subjected to some functional restrictions attributable to the use of the DV format.
•Multiscene continuous recording is not possible for recording in HDV format.
•To record an analog input signal, the option board
For details of the relation between input signals and recording format, see “Input Signals and Recording Formats” (page 36).
Settings for Recording
|
|
|
|
|
|
| Remote control switch |
| 3 Chapter | |||||
| POWER |
|
|
|
|
|
|
|
|
|
| 9PIN |
| Recording |
1 |
|
|
|
|
|
|
|
|
|
|
| EJECT |
|
|
|
|
|
|
|
|
|
|
|
|
| LOCAL |
|
| |
3 |
|
|
|
|
|
|
|
|
|
|
| i.LINK |
| and |
i.LINK | INPUT SELECT | CH2 3/4 |
|
|
|
|
|
|
|
|
| |||
VIDEO | CH1 1/2 |
|
|
|
|
|
|
|
|
| ||||
|
|
|
| OVER | OVER | REPEAT | 1080 | 525 |
|
| HDV DVCAM |
| ||
|
|
|
|
| 0 |
|
|
| ||||||
PHONES | REC/PB LEVEL | REW |
| F FWD | STOP |
| REC | A | (DV) | 2 | Playback | |||
| PLAY |
| B | |||||||||||
5 | 1 | 2 | 3 | 4 |
|
|
|
| DISPLAY | MENU | ASSIGN RESET(NO) | 4 |
| |
|
|
|
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
| TC |
|
|
| ||
|
|
| MONITOR | CH1 | CH2 | TC VITC | 44.1K |
| COUNTER | SET(YES) |
|
| ||
LEVEL | VARIABLE |
| EDIT MODE | 01:23:45:15 | PRESET |
|
| |||||||
| SELECT | SELECT |
|
|
| |||||||||
|
| REC |
|
| REC INHI |
|
|
|
|
| ||||
|
| PB | PRESET |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When controlling this unit from an editing control unit connected to the REMOTE connector or the 
HDV/ DV connector, see “Remote control switch” (page 19).
1 Power on this unit by pressing on the “ ” side of the POWER switch.
2 Press the COUNTER SELECT button to select the type of time data to be used.
Each press of this button cycles through three options: CNT, TC (timecode), and UB (user bit data). The time data type indicator for each option lights as it is selected.
When VITC is selected with the TC SELECT menu item (see page 78), the indication cycles through CNT, VITC, and VIUB.
Selected time data | Time data type indicator |
Count value of the time | CNT |
counter |
|
|
|
Timecode | TC (VITC) |
|
|
User bit data | UB (VIUB) |
|
|
When the external editing control unit is used, selection of the time data type is carried out at the editing control unit.
Recording 41