Note
If the recording format is not DVCAM, a different message appears.
For details, see “When recording format is not DVCAM” (page 69).
6 Insert the cassette.
A message to confirm the TC insert operation appears.
TC INSERT | :DVCAM |
|
| TC insert? |
|
|
|
| |
START TC | INSERT? |
|
| Time counter display |
START: YES | KEY |
| ||
ABORT: MENU | KEY |
| ||
|
|
|
|
|
Monitor screen
To cancel the TC insert operation
Press the MENU button.
7 Press the SET (YES) button.
Timecode recording starts from the current tape position.
TC INSERT :DVCAM |
| Executing | |
|
|
| |
| EXECUTING . |
| Time counter display |
TCR | 00:00:00:00 |
|
|
UBR | 00:00:00:00 |
|
|
| ABORT:STOP KEY |
|
|
|
|
|
|
Monitor screen
When the recording ends, the message “TC INSERT COMPLETED. PUSH THE YES BUTTON.” appears on the monitor screen and “Completed” appears in the time counter display.
8 Press the SET (YES) button to exit the menu.
To stop the TC insert during operation Press the STOP button.
The TC insertion ends at the tape position where the button is pressed.
When recording format is not DVCAM
When you carry out step 5 of the foregoing procedure, the following message appears.
TC INSERT :DVCAM |
| Not DVCAM! | |||
|
|
|
|
| |
NO TC | INSERT | FUNCTION |
| Time counter display | |
AVAILABLE, | DV | RECORDING |
| ||
|
| ||||
FORMAT | SELECTED . |
|
| ||
SELECT | DVCAM | RECORDING |
|
| |
| FORMAT . |
|
| ||
PUSH | THE | YES | BUTTON . |
|
|
|
|
|
|
|
|
Monitor screen
Press the SET (YES) button to end the operation and do it over again after setting the REC FORMAT menu item (see page 74) to DVCAM.
You can use the TC insert function in DVCAM format only.
When the recording format of the tape is not
DVCAM
When you carry out step 7 of the foregoing procedure, the following message appears.
TC | INSERT :DVCAM |
| Not DVCAM! | ||
|
|
|
|
| |
TC | INSERT | IS | ABORTED |
| Time counter display |
DUE TO NON | DVCAM |
|
| ||
| FORMAT | SOURCE . |
|
| |
PUSH THE | YES | BUTTON . |
|
| |
|
|
|
|
|
|
Monitor screen
Press the SET (YES) button to end the operation and do it over again after replacing the tape with one recorded in DVCAM format.
Insert TC and Dubbing for Connector LINK.i the Using 6 Chapter
Rerecording the Timecode – TC Insert Function (DVCAM Format Only) 69